Configdisplay - Polycom VSX3000 Integrator's Reference Manual

configdisplay

Sets or gets the video format and aspect ratio for Monitor 1 or Monitor 2.
Syntax
configdisplay get
configdisplay <monitor1|monitor2> get
configdisplay <monitor1|monitor2> <s_video|composite|vga> <4:3|16:9>
configdisplay monitor2 off
Parameter
get
monitor1
monitor2
s_video
composite
vga
4:3
16:9
off
Feedback Examples
• configdisplay monitor1 vga 16:9
• configdisplay monitor2 s_video 4:3
• configdisplay monitor1 vga 4:3
sets the primary display to VGA with aspect ratio 4:3
• configdisplay monitor1 s_video 16:9
sets the primaray display to S-Video with aspect ratio 16:9
configdisplay get
•
might return something like
configdisplay monitor1 vga 4:3, monitor2 s_video off
Comments
Changing between S-Video and VGA causes the system to restart. If Monitor
1 is set to VGA, Monitor 2 is disabled.
User interface screen location: System > Admin Settings > Monitors
Command History
Introduced in version 8.0.
Description
Returns the current setting.
Specifies Monitor 1.
Specifies Monitor 2.
Sets the specified display to S-Video format.
Sets the specified display to Composite format.
Sets the specified display to VGA format.
Sets the display aspect ratio to 4:3 (standard).
Sets the display aspect ratio to 16:9 (wide screen).
Sets Monitor 2 to off.
System Commands
4 - 51