Nearloop - Polycom VSX3000 Integrator's Reference Manual

nearloop

Activates or deactivates the Near End Loop test.
Syntax
nearloop <on|off>
Parameter
on
off
Feedback Examples
• nearloop on
returns
nearloop on
cs: call[41] chan[0] dialstr[] state[ALLOCATED]
active: call[41] speed[384]
nearloop off
•
returns
nearloop off
cleared: call[41]
dialstring[IP: NAME:]
ended: call[41]
Comments
When Near End Loop is on, you can test the encoder/decoder on the VSX
system. This can help you diagnose a problem with a video call. If you perform
a near end loop test during a call, the far site sees a loop of itself.
User interface screen location: System > Diagnostics > Network: Near End
Loop
Description
Activates the Near End Loop, a complete internal test
of the VSX system.
Deactivates the Near End Loop.
System Commands
4 - 177