Configpresentation - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

configpresentation

4 - 52
Sets or gets the content presentation settings for Monitor 1 or Monitor 2.
Syntax
configpresentation get
configpresentation <monitor1|monitor2> get
configpresentation monitor1 <near|far|content|near-or-far|
content-or-near|content-or-far|all|none>
configpresentation monitor2 <near|far|content|near-or-far|
content-or-near|content-or-far|all|none>
configpresentation monitor1 "value" monitor2 "value"
Parameter
get
monitor1
monitor2
near
far
content
near-or-far
content-or-near
content-or-far
all
none
"value"
Description
Returns the current settings for the active monitors.
Specifies settings for Monitor 1.
Specifies settings for Monitor 2.
Selects near-site video as the video source to display
on the specified monitor.
Selects far-site video as the video source to display on
the specified monitor.
Selects content as the video source to display on the
specified monitor.
Selects both near-site and far-site video as video
sources to display on the specified monitor.
Selects both near-site video and content as video
sources to display on the specified monitor.
Selects both content and far-site video as video
sources to display on the specified monitor.
Selects content, near-site video, and far-site video as
video sources for the specified monitor.
Clears all video sources for the specified monitor.
Sets presentation mode for both monitors.