Pricsu - Polycom VSX3000 Integrator's Reference Manual

pricsu

Sets or gets the PRI CSU mode for a T1 interface.
Syntax
pricsu <get|internal|external>
Parameter
get
internal
external
Feedback Examples
• pricsu internal
• pricsu external
Comments
By default, the T1 PRI network interface module is set for internal CSU mode.
User interface screen location: System > Admin Settings > Network > ISDN
(page 2): External CSU
This screen is only accessible if you have a PRI network interface connected to
your system.
See Also
The PRI line buildout for a T1 interface is set using the
command on page 4-204.
Description
Returns the current setting.
Sets the internal CSU mode. This is the default.
Sets the external CSU mode. When selected, you must
specify the PRI line buildout.
System Commands
prilinebuildout
4 - 201