Monitor1Screensaverouput - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

monitor1screensaverouput

4 - 166
Sets or gets whether to send either black video or "No Signal" to Monitor 1
when the screen saver activates.
Syntax
monitor1screensaveroutput <get|black|no_signal>
Parameter
get
black
no_signal
Feedback Examples
The command
monitor1screensaverouput black
returns
monitor1screensaverouput black
The command
monitor1screensaverouput get
returns
monitor1screensaverouput black
Comments
User interface screen location: System > Admin Settings > Monitors >
Monitors
Command History
Introduced in version 8.5.
See Also
See the
monitor2screensaverouput
Description
Returns the current setting.
Sends black video to Monitor 1 when the system goes
to sleep and the screen saver activates.
Sends no signal to Monitor 1 when the system goes to
sleep and the screen saver activates.
command on page 4-168.