Dialchannels - Polycom VSX3000 Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

dialchannels

4 - 66
Sets or gets whether to dial ISDN channels in parallel. This command is only
applicable if you have an ISDN network interface connected to your system.
Syntax
dialchannels get
dialchannels set n
Parameter
get
set
n
Feedback Examples
dialchannels 8
Comments
User interface screen location: System > Admin Settings > Network > ISDN
(page 3)
Description
Returns the current setting.
Sets the number of channels to dial.
Sets the number of channels to dial. n is 8 for QBRI, 12
for PRI.