Ntpmode - Polycom VSX3000 Integrator's Reference Manual

ntpmode

Sets or gets the mode of the system's Network Time Protocol (NTP) server.
NTP server time is used to ensure synchronized time data in the local Call
Detail Report.
Syntax
ntpmode <get|auto|off|manual>
Parameter
get
auto
off
manual
Feedback Examples
• ntpmode auto
• ntpmode off
• ntpmode manual
Comments
User interface screen location: System > Admin Settings > Network > IP >
H.323 Settings > NTP Setup
See Also
See the command on page 4-184.
ntpserver
Description
Returns the current time server mode.
Automatically selects an NTP server from the Internet.
Turns off the use of an NTP server.
Lets you specify a server using the
command on page 4-184.
System Commands
ntpserver
4 - 183