SMC Networks HRR018-A-10 Series Operation Manual page 99

Displays the function of the Contact input signal 2.
Set value
Contact input signal 2 type
11.
Press the [▼] key. Displays screen for setting the type of Contact input signal 2.
Displays the type of Contact input signal 2.
Contact input signal 2 Operation
12.
Press the [▼] key. Displays screen for setting the operation of the Contact input signal
2.
Select the Contact input signal 2 operation.
Contact input signal 2 Operation
13.
Press the [▼] key. Displays screen for setting the function of the Contact output signal
1.
Displays the function of the Contact output signal 1.
HRR Series
Contents
OFF
No input signal
STOP
Stop signal input
SW
External switch signal input
Contact input signal 2 type
DIN2 ⇒ SW ⇒ TYPE( Alternately displayed )
Set value Contents
ALT
Alternate signal
mT
Momentary signal
Contact input signal 2 operation
DIN2 ⇒ CON ⇒ TYPE( Alternately displayed )
Set value Contents
A N.O. type
B N.C. type
Contact output signal 1 function
DOUT1 ⇒ SEL( Alternately displayed )
Chapter 5 Display and Setting of Various Functions
Initial value
○
―
―
Initial value
○
―
Initial value
○
―
HRX-OM-W002
5.5 Advanced setting mode
5-49