SMC Networks HRR018-A-10 Series Operation Manual page 98

HRX-OM-W002
Chapter 5 Display and Setting of Various Functions
Displays the function for the Contact input signal 1.
Set value
Contact input signal 1 type
8.
Press the [▼] key. Displays screen for setting the type of Contact input signal 1.
Displays the type of Contact input signal 1.
Contact input signal 1 Operation
9.
Press the [▼] key. Displays screen for setting the operation of the Contact input signal
1.
Select the Contact input signal 1 operation.
Contact input signal 2 Select function
10.
Press the [▼] key. Displays screen for setting the function of the Contact input signal 2.
5.5 Advanced setting mode
5-48
Contents
OFF
No input signal
RNST
Run / stop signal is input
RUN
Run signal is input
SW
External switch signal input
Contact input signal 1 type
DIN1 ⇒ SW ⇒ TYPE( Alternately displayed )
Set value Contents
ALT
Alternate signal
mT
Momentary signal
Contact input signal 1 operation
DIN1 ⇒ CON ⇒ TYPE( Alternately displayed )
Set value Contents
A N.O. type
B N.C. type
Contact input signal 2 function
DIN2 ⇒ SEL( Alternately displayed )
Initial value
○
―
―
―
Initial value
○
―
Initial value
○
―
HRR Series