SMC Networks HRR018-A-10 Series Operation Manual page 88

HRX-OM-W002
Chapter 5 Display and Setting of Various Functions
Output of circulating fluid temperature rise signal
13.
Press the [▼] key. Displays screen for setting the output of circulating fluid temperature
rise signal.
RUN
The user can select whether there is an output signal when alarm "AL14 circulating fluid
temperature rise" occurs.
Set value
ON
OFF
Changing of circulating fluid temperature drop alarm behaviour
14.
Press the [▼] key. Displays screen for changing the chiller behaviour when the
circulating fluid temperature drop alarm occurs.
RUN
The user can decide select the chiller behavior if alarm "AL15 circulating fluid temperature drop
" occurs.
Set value
OFF
WRN
FLT
5.5 Advanced setting mode
5-38
Output of circulating fluid temperature rise signal
TEMP ⇒OUTHI ⇒ OUTP( Alternately displayed)
Contents
Output signal to contact output or serial
communication.
No signal is output.
Operation at occurrence of circulating fluid
temperature drop alarm
TEMP ⇒OUTLO ⇒ ALARM( Alternately displayed )
Contents
Alarm is not generated.
Operation of this product will continue when the
alarm occurs.
Operation of this product will stop when the
alarm occurs.
Initial value
○
―
Initial value
○
―
―
HRR Series