SMC Networks HRR018-A-10 Series Operation Manual page 82

HRX-OM-W002
Chapter 5 Display and Setting of Various Functions
Temperature range monitor start time
24.
Press the [▼] key. Displays temperature range monitor start time setting screen
After operation starts, monitoring of the temperature range starts after a set time (sec).
RUN
Refer to P.5-29,P.5-30 [Setting example of temperature range monitoring function].
Temperature range time outside monitoring range
25.
Press the [▼] key. Displays time outside temperature range setting screen. When the
circulating fluid temperature falls outside the temperature range, if it enters the range
again within the set time (sec) a signal will not occur.
RUN
Refer to P.5-29,P.5-30 [Temperature range monitoring function setting example].
Dust filter replacement time
26.
Press the [▼] key. Displays dust filter replacement time setting screen.
RUN

Dust filter replacement time
T he maintenance time of the dust filter can be set by the user as a reminder to clean
the filter.Maintenance notice "MT.04: Dustproof Filter Maintenance" will be generated
after the set time has elapsed.For maintenance notification, refer to "5.4.4
Notice for maintenance Menu".The factory default setting is 5000 hours. The time
can be set in the range of 1 to 9999 hours.
DI filter replacement time
27.
Press the [▼] key. Displays DI filter replacement time setting screen.
RUN
5.5 Advanced setting mode
5-32
Temperature range Monitor start time
(setting range ：0 to 9999 sec)
SEC
TEMP ⇒ OUT ⇒START( Alternately displayed )
Time outside of temperature range
( setting range ：0 to 600 sec)
SEC
TEMP ⇒ OUT ⇒OVER( Alternately displayed )
Dust filter replacement time
H
FLTR ⇒ TIME( Alternately displayed )
DI filter replacement time
H
DI ⇒ TIME( Alternately displayed )
HRR Series