SMC Networks HRR018-A-10 Series Operation Manual page 72

HRX-OM-W002
Chapter 5 Display and Setting of Various Functions
MODE
MODE1
MODE2
MODE3
OFF
■
Example of MODE 1
When the offset temperature is 1
(circulating fluid set temperature + offset temperature.) Even if the discharge temperature is
o
31 C, the circulating fluid temperature is 30
heat radiation during sending of the fluid. Circualting fluid display temperature and
communication data is 31
■
Example of MODE 2
When the offset temperature is -1
communication data is 29
and matches the circulating fluid temperature at the customer's device.
5.5 Advanced setting mode
5-22
Explanation
Control the temperature so that the discharge temperature of
the circulating fluid is circulating fluid set temperature + offset
temperature. Circulating fluid temperature indicates the
circulating fluid discharge temperature.
Control the temperature so that the discharge temperature
of the circulating fluid is circulating fluid set temperature.
Circulating fluid temperature indicates the circulating fluid
discharge temperature + offset temperature.
Control the temperature so that the discharge temperature
of the circulating fluid is circulating fluid set temperature +
offset temperature. Circulating fluid temperature indicates
the circulating fluid discharge temperature - offset
temperature.
Control the temperature so that the discharge temperature of
the circulating fluid is circulating fluid temperature set value.
o
C, the thermo-chiller controls the temperature at 31
o
C.
This produuct
Circulating fluid
temperature 31℃
Serial communication
Discharge
temperature 31℃
Circulating fluid display
temperature
31℃
Circulating fluid set
temperature
30℃
Offset temperature
1℃
o
C, circulating fluid display temperature and the
o
C (circulating fluid discharge temperature + offset temperature),
o
C at the customer's device because of 1
Your system
Heat
radiation
1℃
30℃
o
C
o
C of
HRR Series