SMC Networks HRR018-A-10 Series Operation Manual page 71

Offset mode
6.
Press the [▼] key. Displays

Offset function
This function controls the circulating fluid discharge temperature with offset.
Temperature offset may occur between the thermo-chiller and the customer's device
depending on the installation environment. To correct the temperature offset, three types of
offset functions are available (MODE1 to 3). The default setting of this function is "OFF".
【When communication is used】
The circulating fluid temperature sent by serial communication is the circulating fluid
temperature which is displayed on the thermo-chiller (the circulating fluid temperature after
offset).
●
Example of temperature offset
The discharge temperature of the circulating fluid is 30
customer's device is 29
This produuct
Circulating fluid display
temperature
30℃
Circulating fluid set
temperature
30℃
HRR Series
offset mode
OFF： Offset mode disabled / MD 1: Offset mode 1 /
MD 2: Offset mode 2 / MD 3: Offset mode 3
ＭＤ
OFSET ⇒ MODE ( Alternately displayed )
o
C because of heat radiation during sending of the fluid.
Circulating fluid
temperature 30℃
Serial communication
Discharge
temperature 30℃
Heat
radiation
1℃
Chapter 5 Display and Setting of Various Functions
setting screen.
o
C, but the fluid temperature in the
Your system
29℃
HRX-OM-W002
5.5 Advanced setting mode
5-21