SMC Networks HRR018-A-10 Series Operation Manual page 78

HRX-OM-W002
Chapter 5 Display and Setting of Various Functions
TEMP READY stability time
18.
Press the [▼] key. Displays TEMP READY stability time setting screen.
RUN
TEMP READY alarm of monitoring start time
19.
Press the [▼] key. Displays TEMP READY alarm of monitoring start time setting
screen.
RUN
For the function, refer to P.5-26 [TEMP READY function setting example].
Time TEMP READY remove
20.
Press the [▼] key. Displays Time TEMP READY remove setting screen.
RUN
For the function, refer to P.5-26 [TEMP READY function setting example].
Maximum temperature range of temperature range monitoring function
21.
Press the [▼] key. Displays Maximum temperature range of temperature range
monitoring function setting screen.
RUN

Temperature range monitoring function
When the circulating fluid temperature rises / falls, alarms "AL 14: circulating fluid
temperature range rise" or "AL15: circulating fluid temperature drop" can occur.
A TEMP OUT signal can be generated together with the alarm
signal.Here is an example showing these relationships.
5.5 Advanced setting mode
5-28
TEMP READY stability time ( Setting range ：10 to 9999 sec)
SEC
READY ⇒ TIME( Alternately displayed )
TEMP READY alarm of monitoring start time
( Setting range ：0 to 9999 sec)
SEC
READY ⇒ START( Alternately displayed )
Time TEMP READY remove ( Setting range ：0 to 600 sec)
SEC
READY ⇒ OVER( Alternately displayed )
Maximum temperature range of temperature range
℃
monitoring function ( Setting range ：5.0 to 45.0℃)
TEMP ⇒ OUT ⇒ HITMP( Alternately displayed )
HRR Series