SMC Networks HRR018-A-10 Series Operation Manual page 105

This function resets all the set values. Use caution when operating
this function.It is recommended to record the set data before
resetting.
Reset of operation time of the pump
3.
Press the [▼] key. Displays screen for resetting the operation time of the pump.
When the operation time of the pump is reset, the operation time becomes "0 hour".
When MT.01: Notice for pump maintenance is generated, reset the notice for pump
maintenance.
Press "ENT" key when resetting the operation time of the pump. When the display is flashing,
press [ ▲], [▼] key and select "YES". Then, press "ENT" key.
Set value
Reset of operation time of the compressor
4.
Press the [▼] key. Displays screen for resetting the operation time of the compressor.
When the operation time of the compressor is reset, the operation time becomes "0 hour".
When MT.02: Notice for compressor maintenance is generated, reset the notice for
compressor maintenance.
Press "ENT" key when resetting the operation time of the compressor. When the display is
flashing, press [▲], [▼] key and select "YES". Then, press "ENT" key.
Set value
NO
Not reset.
YES
Resets the operation time of the compressor.
HRR Series
Reset of pump operation time
PUMPT ⇒ RESET( Alternately displayed )
Contents
NO
No reset.
YES
Reset pump operation time.
Reset of compressor operation time
COMPT ⇒ RESET( Alternately displayed )
Contents
Chapter 5 Display and Setting of Various Functions
Initial value
○
－
Initial value
○
－
HRX-OM-W002
5.5 Advanced setting mode
5-55