UPS5000-S-(350 kVA-800 kVA)
User Manual
Figure 3-43 Installing the IP21 component
----End
3.2.4.3 Connecting an Ambient T/H Sensor
Procedure
Step 1 Connect the RJ11 port on the ambient T/H sensor to the COM1 port on the
monitoring interface card.
Figure 3-44 Connecting a UPS and an ambient T/H sensor
----End
3.2.4.4 Connecting the BCB Box
Open the cover of the battery circuit breaker box (BCB box), and connect the BCB
port on the dry contact card to the control signal port on the BCB box. For details,
see
Manual .
Issue 12 (2023-05-26)
NO TE
The ambient T/H sensor can be used as a battery temperature sensor.
PDU8000-(0125, 0250, 0400, 0630, 0800) DCV8-BXA001 BCB-BOX User
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
105