Huawei UPS5000-S-400K-SM User Manual page 217

UPS5000-S-(350 kVA-800 kVA)
User Manual
Alarm Parameters
Enable or disable alarm information for components in the system.
iBOX Settings
Set iBOX parameters.
Battery System
Check the SmartLi start address.
SNMP
●
●
●
Event Notice
●
●
●
Outbox configuration
Table 4-18 Outbox settings
Item
Address type
Mailbox server IP address
Encryption mode
Issue 12 (2023-05-26)
The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the
password after your first login, preventing unauthorized access.
NO TE
● The standard protocols SNMP V1 and SNMP V2 have security risks. You are advised
to use the secure protocol SNMP V3.
● The standard encryption algorithms MD5 and DES have security risks. You are
advised to use the secure encryption algorithms SHA and AES.
To obtain the Mib file, choose System Settings > SNMP > Mib File > Export.
The SNMP Trap is used to set the IP address of a server on which the NMS
software is installed. The trap port needs to be the same as that on the NMS.
If SNMP Trap is incorrectly set or not set, system information will be lost or
not reported in time.
Mailbox Settings: Set the email address of the recipient in Mailbox Settings.
Alarm Notification: Set Alarm notification delay in Alarm Notification
Parameter Settings, set Time of the first reminder and Interval in Alarm
Reminder Configuration, and perform the Add, Modify, or Delete operation
on alarm notifications in Alarm Notification User Settings.
After the Event Notice information is configured, alarms will be sent to the
configured mailbox.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
IP address is supported.
After the IP address of the outbox server is
configured, alarm notification emails will be sent to
the configured server.
TLS, SSL, and No encryption are supported.
4 User Interface
208