Huawei UPS5000-S-400K-SM User Manual page 171

UPS5000-S-(350 kVA-800 kVA)
User Manual
Table 4-6 Bypass input
Item
Phase voltage (V)
Line voltage (V)
Phase current (A)
Frequency (Hz)
Power factor
Table 4-7 Battery status
Item
Battery Status
Voltage (V)
Current (A)
Temperature (°C) (only for
lead-acid batteries)
Backup time (min)
Remaining cap. (%)
SOH
Maximum Cell
Temperature (°C) (only for
lithium batteries)
Min Cell Temperature (°C)
(only for lithium batteries)
Table 4-8 Total runtime
Item
Bypass runtime (h)
Issue 12 (2023-05-26) Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Bypass input phase voltage
Bypass input line voltage
Bypass input phase current
Bypass input frequency
Proportion of the bypass input active power to the
bypass input apparent power.
Description
Lead-acid battery: The value can be Not
connected, Equalized charging, Float charging,
Hibernating, discharging, or Not chg. or dis.
Lithium battery: The value can be Not connected,
Float charging, discharging, or Not chg. or dis.
Voltage of the battery string.
Current of the battery string (the current is +
when batteries are being charged and – when
discharged).
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, N/A is
displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
-
-
Description
Time for which the UPS runs in bypass mode.
4 User Interface
162