UPS5000-S-(350 kVA-800 kVA)
User Manual
Figure 3-6 Removing the covers of the power distribution subrack
Step 2 Remove the rear covers from the power cabinet and bypass cabinet.
Step 3 Remove the cable terminals that connect the system signal interface board in the
power cabinet to the bypass cabinet.
Disconnect cables by referring to
ties on the disconnected cables.
Figure 3-7 Silk screens on the system signal interface board in the power cabinet
Issue 12 (2023-05-26)
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure 3-7
and
Table
3 Installation
3-8, and cut off the cable
78