Huawei UPS5000-S-400K-SM User Manual page 176

UPS5000-S-(350 kVA-800 kVA)
User Manual
Item
IP address
Subnet mask
Gateway
MAC address
NAT
mapping
Figure 4-14 RS485 settings
Item
Address
Issue 12 (2023-05-26)
Description
Specifies the IP address for
the Ethernet.
NOTICE
Ensure that the UPS IP address
is unique on the network
segment. Otherwise, the WebUI
display function may not
function properly.
Specifies the subnet mask of
the Ethernet.
Specifies the Ethernet
gateway.
Defines the physical address
of network equipment and is
not configurable.
NAT means network address
translation. If it is set to
Disable, Internet cannot
access IP addresses in
local area network (LAN).
Description
This serial port address is
allocated by the user.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
N/A
Disable
t
he
Default Value
1
4 User Interface
Value Range
1.0.0.0–
223.255.255.25
5
0.0.0.0–
255.255.255.25
5
1.0.0.0–
223.255.255.25
5
N/A
Disable,
Enable
Value Range
1–254
167