Huawei UPS5000-S-400K-SM User Manual page 253

UPS5000-S-(350 kVA-800 kVA)
User Manual
Figure 5-2 Starting the inverter
----End
Starting the UPS on the Old WebUI
Step 1 Open a browser (Internet Explorer 11 for example) and choose Tools > Internet
Options.
Step 2 Click the Advanced tab, check that Use TLS 1.0 and Use TLS 1.1 are selected, and
then click OK.
Step 3 In the address box of the browser, enter https://
Step 4 Enter the correct user name and password and click Login.
Step 5 On the home page of the WebUI, choose Monitoring > Control, click Inv. ON,
and confirm the operation to start the inverter.
Figure 5-3 Starting the inverter
----End
Issue 12 (2023-05-26)
NO TE
If the power module receives a startup command when it cannot be started, the startup
command will be kept for 1 minute. If the startup command is not cleared within 1 minute
(for example, other faults occur on the module, or you perform shutdown or rectify faults)
and the module can be started, the module responds to the startup command.
NO TE
If the power module receives a startup command when it cannot be started, the startup
command will be kept for 1 minute. If the startup command is not cleared within 1 minute
(for example, other faults occur on the module, or you perform shutdown or rectify faults)
and the module can be started, the module responds to the startup command.
Copyright © Huawei Digital Power Technologies Co., Ltd.
UPS IP address .
5 Operations
244