Safety Compliance - Tektronix PatternPro PPG1600 User Manual

Compliance information
Australia / New Zealand
Declaration of
Conformity – EMC

Safety compliance

EU declaration of
conformity – low voltage
U.S. nationally recognized
testing laboratory listing
Canadian certification
Additional compliances
Equipment type
Safety class
58
Complies with the EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
CISPR 11. Radiated and Conducted Emissions, Group 1, Class A, in
accordance with EN 61326-1.
Australia / New Zealand contact.
FLUKE AUSTRALIA PTY LTD
Unit 26, 7 Amelia Avenue
Castle Hill, NSW, Australia 2154
ABN: 43 086 173 882
This section lists the safety standards with which the product complies and other
safety compliance information.
Compliance was demonstrated to the following specification as listed in the
Official Journal of the European Union:
Low Voltage Directive 2014/35/EU.
EN 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
UL 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 1: General
Requirements.
IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
Test and measuring equipment.
Class 1 – grounded product.
PPG1600, PPG3000, & PPG3200 Pattern Generator User Manual