Mmemory:store:pdata; Mmemory:store:state; Mmemory:load:pdata - Tektronix PatternPro PPG1600 User Manual

Reference

:MMEMory:STORe:PDATa

Form
Parameters
Value Coupling
Range Coupling
Default
Description
Example

:MMEMory:STORe:STATe

Form
Parameters
Value Coupling
Range Coupling
Default
Description
Example

:MMEMory:LOAD:PDATa

Form
Parameters
Value Coupling
Range Coupling
Default
Description
Example
38
Set
String
None
None
N/A
Store the current pattern data into the system memory. In a multi-channel unit, the pattern data
running on all channels are stored. The pattern length and all pattern data up to the pattern
length are stored. The filename can be up to 8 characters long and is not case-sensitive.
Filenames must consist of only alphanumeric characters.
Store the pattern data in system memory.
:MMEM:STOR:PDAT "PATT1011"
Set
String
None
None
N/A
Store the instrument setting into the system memory. Every parameter of the instrument is
stored except for pattern data, pattern length and output enable status. The filename can be up
to 8 characters long and is not case-sensitive. Filenames must consist of only alphanumeric
characters.
Store the parameters in system memory.
:MMEM:STOR:STAT "PARAM22"
Set
String
None
None
N/A
Recalls the pattern data from a saved file in system memory. In a multi-channel unit, the
pattern data of all channels are recalled. The pattern length and all data up to the pattern
length are recalled. Pattern memory addresses above the pattern length are not changed. The
filename can be up to 8 characters long and is not case-sensitive. Filenames must consist
of only alphanumeric characters.
Recall the pattern data from file "PATT1011".
MMEM:LOAD:PDAT "PATT1011"
PPG1600, PPG3000, & PPG3200 Pattern Generator User Manual