Performance Conditions; Safety Standard Compliance; Emi Compliance - Tektronix TSG 95 Service Manual

Specifications

Performance Conditions

Safety Standard Compliance

EMI Compliance

1–2
The Performance Requirements are valid if the instrument has been adjusted at
approximately 25 C, is being operated within environmental limits (see Table
1–11), and has had a minimum warm-up of 20 minutes.
The following safety standards apply to the TSG 95:
ANSI S82 — Safety Standard for Electrical and Electronic Test, Measuring,
Controlling, and Related Equipment, 1988.
CAN/CSA C22.2 No. 231 M89 — CSA Safety Requirements for Electrical
and Electronic Measuring and Test Equipment.
IEC1010-1 — Safety Requirements for Electrical Equipment for Measure-
ment, Control, and Laboratory Use (1990).
UL1244 — Standard for Electrical and Electronic Measuring and Testing
Equipment, Second Edition (1980).
The following electromagnetic interference (EMI) regulatory requirements are
applicable to the TSG 95:
47 CFR, Chapter 1 (FCC Rules), Part 15, Class A
EN 50 081-1 Generic Emission Standard. Part 1: Residential, commercial
and light industry.
EN 50 082-1 Generic Immunity Standard. Part 1: Residential, commercial
and light industry.
NOTE. Shielded cables were used in the certification of this instrument; therefore,
shielded cables are recommended to be used when operating. (EC 92)
TSG 95 Service Manual