Clock Outputs - Tektronix PatternPro PPG1600 User Manual

Clock outputs

Amplitude
Output impedance
Maximum external DC
voltage
Jitter
Connector type
PPG1600, PPG3000, & PPG3200 Pattern Generator User Manual
The clock outputs are single-ended, applicable for internal clock. The internal
clock rate ranges from 15 GHz to 30 GHz (PPG3000 series) and 16 GHz to
32 GHz (PPG1600 and PPG3200 series).
PPG1600 Clock output frequency. (Internal clock)/(n), n = 2,4,8, or 16 user
programmable
PPG3000 Clock output frequency. (Internal clock)/(n), n = 1,2,4,8, or 16 user
programmable
PPG3200 Divided Clock output frequency. (Internal clock)/(n), n = 2,4,8, or 16
user programmable
PPG3200 Full Rate Clock output frequency (single output for PPG3201/2, quad
output for PPG3204). Internal clock
Amplitude varies with frequency
600 mV , typical; 200 mV
p-p
50 Ω, AC-coupled
±5 V
< 200 fs typical, measured by spectrum analyzer on 1010 pattern, phase noise
RMS
integrated from 1 kHz to 1 GHz.
2.92 mm (PPG3000 & PPG1600)
2.4 mm (PPG3200)
minimum; 1.0 V maximum
p-p p-p
Specifications
17