Setting The Contrast Ratio; Enabling The Image Freeze - Christie HS Series User Manual

• Color space
• Color temperature
• Gamma
• White peaking
• Color enhancement
• Color wheel speed
• Skin color
• Sharpness
• Brightness
• Contrast
• HSG
• RGB Gain/Offset
2. Select Menu > Image Settings > Save to User.
3. Press ENTER.

Setting the contrast ratio

Use contrast enhancement function to raise the contrast ratio.
1. Select Menu > Image Settings > Contrast Enhancement.
2. Select the appropriate calculation method for contrast ratio:
• Off—Disable the contrast enhancement which show the normal contrast ratio.
• Dynamic Black—Adjust the contrast ratio depending on the contents by minimizing the
black levels in the projected image while electronically increasing the gain in the image.
The result is enhanced detail and an increased contrast ratio of 7500:1 (HD)/6500:1 (WU
models).
• Real Black—Turn off the laser light while projecting black content.
3. To confirm the selection, press ENTER.

Enabling the image freeze

Pause the display screen despite any change in the source device.
1. Select Menu > Image Settings > Image Freeze.
2. To swap, press ENTER.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
39