User Configuration; Setting The Contrast Ratio - Christie Inspire Series User Manual

User configuration

Customize the picture setting by adjusting the brightness, contrast, input levels, color temperature,
gamma, detail, white peaking, and so on.
1. Adjust the parameters to customize user's picture setting:
• Video
• Bright
• Enhanced
• REC709
• DICOM SIM
• Blending
• HDR
• 3D
• 2D High Speed
2. Select Menu > Image Settings > User Configuration.
3. Press ENTER.

Setting the contrast ratio

Use contrast enhancement function to raise the contrast ratio.
1. Select Menu > Image Settings > Contrast Enhancement.
2. Select the appropriate calculation method for contrast ratio:
• Dynamic Black
video sources. It improves the black level in dark scenes by reducing the light output.
• Speed—Adjust the speed of the light source correction. The value ranges from 1 to 15. A
lower value makes the correction slower and less aggressive while a higher value results
in the faster correction.
• Strength—Set the strength of the dynamic contrast adjustment. The value ranges from
0 to 3, the higher the value the stronger the correction.
• Level—Adjust the light source when the brightness level of the current content gets
lower than the set value. The value ranges from 50% to 100%. The higher the value, the
larger the range to adjust the light source.
• Real Black—Enable the function to automatically increase the contrast ratio by turning
off the laser light when black image is detected.
• Lights Out Timer—Set a timer for the laser light to turn off after detecting black
content. The set value ranges from 0s to 20s.
Inspire Series User Manual
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
TM
—Enable the function to automatically adjust the contrast ratio for
Adjusting the image settings
35