Table of Contents
Advertisement
Figure 47. Security bezel removal
Demo video
Watch the procedure on YouTube
Remove the top cover
Follow the instructions in this section to remove the top cover.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
To remove the top cover, complete the following steps:
Step 1.
Unlock the cover release latch with a flat-end screwdriver.
Figure 48. Lock on the top cover latch
.
Chapter 3
Server hardware setup
87
Advertisement
Table of Contents
