Install The Chassis Air Baffle; Install An Adapter Into A 4U Pcie Riser Cage - Lenovo ThinkSystem SR860 V2 Setup Manual

Table 38. 7mm drive cage cables
7mm drive PCIe connector
1

Install the chassis air baffle

Follow instructions in this section to install the chassis air baffle.
About this task
Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
•
https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Align the chassis air baffle with the guides on both sides of the server, and lower it until it stops.
Figure 114. Installing the chassis air baffle

Install an adapter into a 4U PCIe riser cage

Follow instructions in this section to install an adapter into a 4U PCIe riser cage.
About this task
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
•
https://list.youku.com/albumlist/show/id_54461099
Procedure
Notes: Make sure to install the following adapters in corresponding slots in appropriate riser cages:
• T4:
ThinkSystem SR860 V2Setup Guide
218
7mm drive power connector
2