Install The Pcie Riser-Card Assembly - Lenovo ThinkSystem SR850 Maintenance Manual

Figure 84. PCIe riser-card removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the PCIe riser-card assembly

Use this procedure to install the PCIe riser-card assembly.
Before installing the PCIe riser-card assembly:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 51).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. Watch the procedure. A video of this procedure is available from the following links:
• https://www.youtube.com/playlist?list=PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
• http://list.youku.com/albumlist/show/id_50483449
4. Disconnect the USB 3.0 cable of operator panel tray assembly, and remove it vertically from the system
board.
Figure 85. Removing USB 3.0 connector vertically
To install the PCIe riser-card assembly, complete the following steps:
Step 1. Assemble the PCIe riser-card assembly:
88
ThinkSystem SR850 Maintenance Manual