Parameters For Handwheel Operation; Parameters For Workbench Range; Parameters For Prompt - WEIHONG NK280B Manual

Table 6: Parameters Related with Encoder Function
Parameter Name
Encoder Feedback
Encoder Type
Encoder Digit

Parameters for Handwheel Operation

It includes parameters that will influence the usage of handwheel.
Table 7: Parameters Related with Handwheel Operation
Parameter Name
Precise Pulse Counting
Handwheel Direction
Handwheel Acceleration
Handwheel Connection

Parameters for Workbench Range

Workbench Range refers to valid movement ranges or the travelling range in X, Y and Z
direction. It serves as soft limits to protect the machine.
Setting values for the upper limits and the lower limits are decided by specification of the
machine. When you set the range for the first time, please carefully observe actual moving
distance of the axes.
Table 8: Parameters Related with Worktable Stroke
Parameter Name
Negative Travel Limit (MCS)
Positive Travel Limit (MCS)
Enable Workbench Range Check

Parameters for Prompt

Parameters that decides prompt method for certain functions or actions.
Description
Whether to use the encoder feedback function
or not.
0: Incremental encoder; 1: Absolute encoder.
The digit number of the encoder.
Description
Yes: Machine moves the exact pulses
generated by handwheel; No: Machine moves
only when the handwheel is turning.
Relations between the directions of handwheel
turning and axes motion. 1: Same direction; -1:
Opposite direction.
Smaller value gets smoother handwheel
movements.
0: Connect the handwheel with Lambda
controller; 1: Connect the handwheel with
NK280B host.
Description
The positive travel limit in each axis.
The negative travel limit in each axis.
Whether to check the workbench range.
NK280B Parameter Reference
50