Parameters For Tool Compensation; Parameters For Tool Calibration - WEIHONG NK280B Manual

Parameter Name
Quadrant Compensation Delay
Quadrant Compensation Intensity

Parameters for Tool Compensation

Parameters that will influence the tool compensation function.
For details about the tool compensation function, see NcStudio Function Manual.
Table 11: Parameters Related with Tool Compensation
Parameter Name
Enable Cutter Compensation
Cutter Compensation Option
Cutter Compensation Interfere Type
Cutter Compensation Lookahead Segno

Parameters for Tool Calibration

Parameters that will influence tool calibration function.
Table 12: Parameters Related with Tool Calibration
Parameter Name
Cali Mode
Fine Tool Cali Times
Rough Speed of Cali.
Description
The spikes may not appear exactly at the
four quadrant positions due to mechanical
properties of machine tool, but a little
distance away from the quadrant points.
Estimate the time to travel this distance
and then set the time as the value of this
parameter.
The larger the value is, the more obvious the
compensation result will be.
Description
Yes. Enable G41,G42 cutter radius
compensation and G43,G44 cutter length
compensation.
Specify the Cutter Compensation Type. 1:
Normal type; 2: Intersect type; 3: Insert type.
0: None; 1: Three; 2: More
Specify the segment number when tool
compensation interfere avoidance is enabled,
with range [3~30].
Description
Tool calibration mode. 1: Auto measurement
mode (namely the fixed tool calibration); 2:
First and exchange calibration mode.
Fine calibrating times when the tool
approaches to the surface of tool sensor.
The speed when the tool approaches the
surface of tool sensor for the first time.
NK280B Parameter Reference
52