Verify Network Connection; Manage Program Files - WEIHONG NK280B Manual

2. Modify the name of device and MAC address.
Modify the device name to WinCE01, WinCE02, WinCE03...
MAC address can be any hexadecimal data.

Verify Network Connection

After IP address setup of both NK280B and the computer, use ping command to verify the
connection.
To verify the connection between the host and the computer:
1. Click on the computer: Start > Run, enter "cmd" and click Enter.
2. On the pop-out console, type in ping command and click Enter to check the result.
ping command: ping IP address
Enter ping command: ping 192.168.1.189
Successful ping result goes like:
If ping failed, check connection of devices and their IP setups.

Manage Program Files

NK280B can access program files of four types:
• Local file: program files stored in NK280B host.
Operation
35