Override Switch; Buttons For Movement Control - WEIHONG NK280B Manual

K1~K3 buttons are reserved for customization, whose functions can be customized.

Override Switch

It contains two types of override switch:
Relationship between current speed and override is shown below.

Buttons for Movement Control

It contains buttons for spindle control and program running.
Buttons are:
Enable or disable the lubricant port to turn on
or off the lubricant.
Enable or disable the port to make the tool
magazine rotate in clockwise direction or stop
the tool magazine.
Enable or disable the port to make the tool
magazine rotate in counter-clockwise direction
or stop the tool magazine.
Enable or disable the port to turn on or off the
light.
Adjust feed override from 0~120%.
Adjust spindle override from 50~150%.
Start the spindle rotation in clockwise
direction.
Getting Started
10