Set Driver Parameters - WEIHONG NK280B Manual

3. Restart the driver.

Set Driver Parameters

To set driver parameters:
1. Press Parameter > =.
Driver Param interface shows.
2. To modify driver parameter, pressing direction key ↑/↓/←/→ > Enter.
Due to different driver brands, setting of parameter differs. Setting value of Driver Type in
software shall prevail.
3. Do one of the following:
Keys Explanation
F1 Add other parameters that do not show.
Note:
Wise driver shows all parameters while YASKAWA driver shows only a part of them.
F2 Delete parameters unnecessary to show on the Driver Param interface.
F3 Restore all parameters to its initial status, that is, all the added parameters will be
invalid.
F4 Restore settings of all parameters to factory settings.
F5 Directly import parameter files from mobile devices like USB flash disk to driver.
Note:
Basic Commissioning
16