Compensate Tool; Connect Network - WEIHONG NK280B Manual

2. Press T to select "Yes" to enable tool life management function.
3. Press N to check in the checkbox in front of "Modify Tool Life(N)".
4. Set used times for each tool.

Compensate Tool

If the tool nose radius is altered due to tool wear, tool sharpening or tool change, you can input
the new tool parameter values in the Tool Compensation interface, saving trouble of modifying
the programmed machining file.
To compensate tool:
1. Press Advanced > = > F6.
Tool compensation interface shows.
2. To set corresponding values for tool compensation, press direction key ↑/↓/←/→ > Enter.

Connect Network

To realize mutual access between NK280B and the computer, you need to set network
connection first.
Make sure the computer and NK280B are within the same LAN.
To set network connection between the computer and NK280B:
1. Set IP address.
• Automatically set IP address.
• Manually set IP address.
2. Modify device information.
Operation
33