Simulate - WEIHONG NK280B Manual

2. Operate on parameter settings.
• F1: Restore the selected parameter settings.
• F2: Export the selected parameter settings to USB flash disk. The file is formatted as by
default.
• F3: Import an external parameter settings file () into the current system. You need to
restart the system to validate the parameter settings.
• F7: Delete the selected parameter settings.

Simulate

Simulation provides a fast but lifelike simulated processing environment for users.
Make sure you have load the program file into the system before simulation.
Running in the mode of simulation, the system will not drive the machine tool to do the relative
actions but only show the processing trace of the cutter in high speed in the Motion Trace
interface. By simulating, users see moving form of the machine tool in advance, avoiding
machine tool damage due to programming mistakes in processing procedure.
To execute simulation of a program:
1. Start simulation.
• Press State > B > F1 to start simulation.
• Press Simulate button on operational panel to start simulation.
2. Press F7 on Motion Trace interface to stop simulation.
Operation
40