Return to Workpiece Origin
At any time during machining, you can return to the workpiece origin(also called WCS Zero).
When machine tool returns to the workpiece origin, Z-axis returns to the safety height first, then
X-axis and Y-axis return to the origin. The safety height for Z-axis is to aviod potential crash
onto the workpiece surface during returning.
To return to the workpiece origin:
Press State > A > F7.
X, Y and Z-axis return to the workpiece origin automatically in order of Z-XY.
Return to Fixed Point
The fixed point is a position on the machine, which is specified by parameters.
Returning to the fixed point facilitates following operations.
• Change the workpiece.
• Change the tool.
For details, see NcStudio Function Manual.
To return to the fixed point:
1. Activate Jog, Handwheel or Stepping mode.
2. Press State > A > F6.
Three axes return to the fixed point.
Execute MDI
Manual Data Input (MDI) is a way to directly execute user input NC code.
To enter NC code and execute it:
1. Press Advanced > C to turn to User Code Input interface.
Operation
43