Table of Contents
Advertisement
• Press Handle button to activate Handwheel mode, and use handwheel to move X-axis.
• Press Jog button to activate Jog mode, and press X+ or X- button to move X-axis.
4. (Optional) If actual moving direction is opposite with setting value, change to the opposite
value.
Current setting value for parameter Axis Direction (X) is 1, manually move X-axis but X-axis
moves towards the negative direction. Change setting value to -1.
Related reference
Parameter for Axis Direction
Parameters that decide moving direction of each axis.
Operation
The Operation is designed to help users (mainly manufacturers) to understand main operations
involved during machining.
You can start machining workpiece according to the following steps:
Table 2: Overview of Workpiece Machining Process
Step
Operation
1
Execute warm-up and trial run.
2
Manually moves each axis to check its movement.
3
In general double Z software, switch software
configuration.
4
Return to machine origin.
5
In general double Z software, select Z-axis.
6
Calibrate tool.
7
Set tool No.
8
Set workpiece coordinate.
9
Manage machining technics.
10
Connect network.
11
Load program file.
12
Set related parameters necessary for machining.
13
To have a general idea about the program and tool
path, execute simulation.
14
Run program.
Reference
Execute Warm-up and Trial
Run
Manually Move Machine
Tool
Switch Software
Configuration
Return to Machine Origin
Select Z-axis
Calibrate Tool
Set Tool Number
Set Workpiece Coordinate
Manage Technics
Connect Network
Manage Program Files
Set Parameters
Simulate
Run Program
Operation
23
Hide quick links:
Advertisement
Table of Contents
