Introduction To Parameters - WEIHONG NK105 G2F Manufacturer's Manual

Specialized Concentrated Focused
 Select WCS
Press ―Menu‖→ 3. Operations→ 6. Select WCS, and then press [OK] to enter the page shown in Fig.
3-11, displaying the 6 WCSs from G54 to G59.
After pressing the ―Up‖ and ―Down‖ keys to select the corresponding WCS, press [OK] to confirm the
selection. After confirmation, the number before X/Y/Z/A axis will change accordingly, WCSs of
G54~G59 corresponding to 1~6 respectively.
 Array Process
Array machining (array process), i.e. array machining of graphics, is available in NK105G2F/G3F. After
selecting a file and specifying rows, columns and row/ column space, press ―Load Now‖ to generate and
load the array file. Before starting machining, you can turn to ―Machining Info‖ under ―Operations‖ to see
the machining range of the array file.
Operation steps are as follows:
Menu→ Operations→ Array Process→ Load the desired single-workpiece machining file, and set
parameters like Rows, Columns, RowSpace, ColSpace and Delay→ Select Load Now and press OK→
Press Start to start array machining. The generated array file can be found under the source file path.
CAUTION
1) This function is only available for tool path files of text format, like txt, nc and u00.
2) Codes, like G92, M17 and G65, and #variables, like #1 and #2, cannot appear in the tool path file.
3) Codes, like M30, M2, when included in the tool path file, will be removed automatically from the newly
generated array file.
4) Call of a sub-program in the PUBLIC is not allowed in the tool path file.

Introduction to Parameters

3.5.3.
For details of parameter contents, refer to chapter 7.1.
For parameter modification method, it can be divided into two types.
 Input of Numeric Value
After entering the parameter modification page, directly input the desired number, and then press [OK] to
save it or press [ESC] to return to the previous page. Only when [OK] is pressed can the modification be
saved after parameter modification each time.
G 5 4 W C S
G 5 5 W C S
G 5 6 W C S
S elect b y [O K ] k ey
Fig. 3-11 WCS selection page
System Page「25」