Backup
Restore
Delete Parameters
Configuration
System
Run Old
NK280B Parameter Reference
The Parameter Reference is designed to help users (mainly manufacturers) to locate information
easily and quickly. It includes frequently-used parameters for main functions and operations.
Note that only parameters related to main and frequently-used functions are listed in a brief
way. For complete parameter information, please refer to Parameter Reference Manual.
Parameter for Axis Direction
Parameters that decide moving direction of each axis.
Table 3: Parameters Related with Axis Direction
Parameter Name
Axis Direction
Driver Parameters for Auto Adjustment
Driver parameters that are related to auto adjustment. In terms of driver brands, setting may
differs.
Table 4: YASKAWA Driver Parameters Related with Auto Adjustment
Parameter Name
Pn000 Basic Function Selections 0
Pn20E Electronic Gear Ratio (Numerator)
Pn210 Electronic Gear Ratio (Denominator)
Export the software which has been backed up
to \Backup file folder in root directory of USB
flash disk.
Restore the system with software in \Backup
file folder.
When updating the software to the latest
version, use the button to delete parameter
settings of the last version. Skip it if you want
to reserve previous parameter settings.
Use new system configuration file, i.e. Config
file.
It refers to updating the software in nature,
upgrading the software to the latest one or
installing a new one. Only software formatted
in.weihong can be identified.
Start the previous operating system.
Descritpion
It sets moving direction of each axis. 1:
Positive direction; -1: Negative direction.
Description
It is for selecting rotation direction.
• 0000: take CCW as positive direction.
• 0001: take CW as positive direction.
It is for ensuring control system parameters
Electronic Gear Ratio (Numerator) and
Electronic Gear Ratio (Denominator) are
consistent with the same driver parameters.
NK280B Parameter Reference
48