Guide Machining By The Handwheel - WEIHONG 200 Series Manual

2. To enter into User Code interface, press
3. To move the cursor to the target line, e.g. line (3), press ↑ / ↓.
4. Press Insert, and input a command.
5. To execute the command, do one of the following :
– Press F3.
– Press Enter.

4.8 Guide Machining by the Handwheel

This operation is used to manually control the automatic execution speed of the
machining program during automatic machining, so as to guard against dangers
caused by a wrongly loaded program or an inappropriate toolpath.
Before guiding machining by the handwheel, connect the handwheel.
上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
→ C:
36 / 52