Operational Buttons; Interface On The Back; Software - WEIHONG NK280B Manual

Operational Buttons

F1~F7 buttons below the LED display.

Interface on the Back

Connect to correct component according to the following figure.

Software

At present, the software contains two types, according to active axes.
General Double Z Software
The software is used for machine tools with two worktables and two Z-axis. It contains two types
of configuration according to movement of Z1-axis and Z2-axis.
Stop the spindle rotation.
Start the spindle rotation in counter-clockwise
direction.
Start programming running.
Resume programming running. In case of
power interruption or emergency stop in
machining, if the workpiece origin is secured,
press the button to resume program running
from the exact interrupted position.
Stop program running.
Getting Started
11