Parameters For Actions After Program End - WEIHONG NK280B Manual

Parameter Name
Max Cali Tolerance
Tool Sensor Thickness
Tool Sensor Fixed Position (MCS)

Parameters for Actions after Program End

Parameters that will influence the system actions after machining stops, including prompt
method and spindle actions.
Table 13: Parameters Related with Actions after Program End
Parameter Name
Notification Options when Cycle Completed
Spindle Action Options when Cycle Completed Spindle actions when cycle ends. 0: Stay; 1:
Spindle Off when Cycle Completed
Spindle Off when Cycle Stop
Description
During several times of tool calibration, the
maximum tolerance of calibration results.
The distance from Tool Sensor surface to WCS
Z0. It can be used to automatically calculate
WCS Z0 when cutter touches the Tool Sensor.
It includes the X, Y and Z-axis machine
coordinate of the fixed tool sensor.
Description
Inform types when cycle ends. 0: No light on;
1: Red light on for 3 sec; 2: Red light on until
any input from mouse or keyboard.
Move to fixed point; 2: Move to WCS zero.
Whether the spindle stops when cycle
completed.
Spindle Off automatically when cycle stops,
with or without related command codes in NC
file.
NK280B Parameter Reference
53