H3C SR6600-X Series Manual page 51

Press Ctrl+T to start memory test
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing........................Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTENDED CPLD Version: 2.0
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--cfa0:/sr6600-x.bin!............
............................................................................
............................................................................
...
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
....................................................................Done!
System application is starting...
Mainboard 1 is master.
User interface con1 is available.
Press ENTER to get started.
Press Enter, and the following prompt appears:
<H3C>
You can now configure the router.
H3C SR66 BootWare, Version 2.06
: Apr 6 2017
: P2020
: 32KB
: 1000MHz
: DDR3 SDRAM
: 4096MB
: 667MHz
: 8MB
: 999MB
: 128KB
: 2.0
: Ver.B
48
*
*
*