Examining The Installation Site; Weight Support; Temperature - H3C SR6600-X Series Manual

1. Wear the wrist strap on your wrist.
2. Lock the wrist strap tight around your wrist to keep good contact with the skin.
3. Insert the ESD plug into the ESD socket.
4. Make sure the rack is well grounded.
Figure1-1 Attaching an ESD wrist strap
1
2
(1) ESD wrist strap
(3) ESD plug

Examining the installation site

The routers can only be used indoors. To make sure the router operates correctly and to prolong its
service lifetime, the installation site must meet the following requirements:

Weight support

Make sure the floor can support the total weight of the router and accessories (such as the rack and
HIMs/MIMs/MICs).
SR6604-X/SR6608-X/SR6616-X Routers Hardware Information and Specifications.

Temperature

If the temperature in the equipment room is too high, too low, or changes dramatically, the router
reliability is reduced and its service lifetime is shortened. For long-term, highly available operation of
the router, make sure temperature in the equipment room meets the requirements described in
Table1-1.
3
For the weight
(2) Lock
of the router and
3
accessories, see H3C