Displaying The Cpu Usage Statistics; Displaying The Mpu Memory Usage - H3C SR6600-X Series Manual

Table6-2 Command output
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
The operation is not supported on
the specified board or subslot

Displaying the CPU usage statistics

Use the
display cpu-usage
<Sysname> display cpu-usage
Slot 0 CPU usage:
2% in last 5 seconds
2% in last 1 minute
1% in last 5 minutes
Slot 5 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table6-3 Command output
Field
Slot 0 CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes

Displaying the MPU memory usage

Use the
display memory
<Sysname> display memory
System Total Memory(bytes): 4069505360
Description
Card type.
Card serial number.
MAC address of the card:
•
An MPU has a MAC address.
•
An LPU does not have a MAC address, and the field displays
NONE.
Manufacturing date of the card.
display device manuinfo
The
on a card that is virtualized through the MPU.
command to display the CPU usage statistics for all cards.
Description
CPU usage of the card in slot 0.
If the card in the slot has multiple CPUs, "Slot 0 CPU usage" displays the usage of
the master CPU of the card in slot 0, and "Slot 0 CPU 1 CPU usage" displays the
usage of the auxiliary CPU of the card in slot 0.
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.
After a boot, the system calculates and records the average CPU usage rate
every five minutes.
This field displays the average CPU usage rate in the last five minutes.
command to display the active MPU memory information.
63
command is not supported