H3C SR6600-X Series Manual page 29

Figure2-23 Connecting DC power cords
Connecting power cords for the PSR1200-D
Figure2-24 DC power cords
To connect DC power cords:
1. Loosen the captive screws on the power module and remove the power module connector.
Figure2-25 Removing the power module connector.
2. Connect the end marked with "– " to the negative terminal (–) on the power module connector
and fasten the fastening screw.
3. Connect the end marked with "+"to the positive terminal (+) on the power module connector and
fasten the fastening screw.
+
-
26