How To Display The System Uptime; Example For Displaying The System Uptime; Rebooting And Shutting Down The Sce Platform - Cisco SCE8000 GBE Installation And Configuration Manual

Chapter 7 Basic Cisco SCE8000 GBE Platform Operations
NAME: "SCE8000 traffic processor 11", DESCR: "SCE8000 traffic processor"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 traffic processor 12", DESCR: "SCE8000 traffic processor"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device port 0", DESCR: "SCE8000 External bypass device"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device port 1", DESCR: "SCE8000 External bypass device"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 0/0", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 0/1", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 1/0", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""
NAME: "SCE8000 External bypass device 1/1", DESCR: "This module isn't connected"
PID: "" , VID: "" , SN: ""

How to Display the System Uptime

Use this command to see how long the system has been running since the last reboot.
Step 1 At the SCE> prompt, type show system-uptime and press Enter.

Example for Displaying the System Uptime

The following example shows how to display the system uptime of the SCE platform.
SCE#show system-uptime
Cisco SCE8000 GBE

Rebooting and Shutting Down the SCE Platform

•
•
OL-19897-02
uptime is 21 minutes, 37 seconds
Rebooting the SCE Platform, page 7-22
How to Shut Down the SCE Platform, page 7-22
Cisco SCE8000 GBE Installation and Configuration Guide
How to Display the System Uptime
7-21