Next Steps; Related Documentation; Obtaining Documentation And Submitting A Service Request - Cisco MXE 3500 Hardware Installation Manual

Media experience engine

Click OK. The Enable/Disable Shared Folder Password screen displays.

Step 13

(Optional) Press the spacebar to require a password for shared folders and click Next. The Configuration

Step 14

Complete screen displays.

Note

Step 15

Click OK. You have completed initial configuration.

You can now access the Cisco MXE 3500 web UI at this URL: http://mxe_IP_address/mxeui/. The user

name is admin, and enter the password created in Step 11.

Next Steps

After initial configuration is completed, perform the following tasks:

•

The above tasks are described in the "Configuration and Administration Tasks" section of the

Administration Guide for Cisco Media Experience Engine 3500.

For information on obtaining documentation, submitting a service request, and gathering additional

information, see the monthly What's New in Cisco Product Documentation, which also lists all new and

revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

78-19964-03

If you enable shared folder password, you must configure the password after you complete initial

setup.

Install QuickTime—QuickTime is installed separately because of Apple licensing requirements. It

is required for transcoding to and from specific formats. You can obtain the supported QuickTime

version 7.7 at http://support.apple.com/kb/DL837.

Install Licenses—Obtain and install the full Cisco MXE 3500 Release 3.3 license with the base PID

and any optional feature PIDs. The Software License Claim Certificate that ships with your

Cisco MXE 3500 appliance contains instructions on how to obtain licenses.

Configure the Cisco MXE 3500—Your Cisco MXE 3500 appliance comes configured with some

system and user settings. After installing the Cisco MXE 3500 Release 3.3 license, access the

Cisco MXE 3500 web UI to perform the required configuration tasks.

Quick Start Hardware Installation Guide for Cisco Media Experience Engine 3500

Next Steps

Table of Contents